|
| Written by Justblair |  The Sure Electronics Tripath TA2024 Board is out of the box a good value for money amplifier module. However with some careful tweaking it can be made to sound better. This article focuses on the power supply to the Tripath chip and shows some improvements that can be made.
|
|
| Written by Justblair |
So far I have modified several aspects of the Sure TA2024 board. In this article I look again at the input to the device and swap over the input capacitor. |
| Written by Justblair |  The Sure Electronics TA2024 Amplifier impressed on my first inspection although suffered from Poor DC offset and a slightly dull sound. This is the second modification I have made which is aimed at improving the top end sound of the amp.
|
| | Written by Justblair | 
In in another article, I showed how the Sure Tripath Boards unacceptable DC could be reduced significantly by removing a pair of resistors from the PCB effectively disabling Sure's attempt at a DC offset reducing circuit. This article takes the modification a step further to eliminate DC offset completely.
|
| Written by Justblair |  In the last article we looked at the Sure TA2024 amplifier boards, fresh from their box. Amongst the issues identified is that the Sure boards have an issue with DC offset. This article shows how with a very quick modification the DC offset of the boards can be improved upon.
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
| Page 1 of 2 |
